Post by docas101 on Nov 5, 2009 2:02:56 GMT 9
Hello mga bro,
For those who are constantly looking for methods of maintaining your Tokyo Marui Gas Blow Back Pistol to shoot in a whole year around (summer, spring, fall and winter season) the quest is over and no more borrowing of your girl friendfs hair dryer for heating your pistol magazines during cold season .lol ;D
Worthington Propane/Green Gas is now available. I bought mine from bro Fortminor
Now, in order to run this gas in your pistol, you need these two stuff, the Madbull Green gas adopter and # 15 HP silicon oil or any low density silicone oil. I will explain later on how to use these stuff while this brief instruction goes on.
Basic Installation guide:
Step 1- remove the cap
Step 2- put pipe Teflon tape on the thread to insure tight fitting and to prevent gas leakage. (2-3 turns is enough)
Steps 3- install the gas adopter. Twist clock wise, Do it as quick as you can, if you donft have strong griping in your hands
You can also use a pipe wrench just like I did. (do not over tighten and do not cross the adopter threads)
Note: Green Gas is dry and can damage solid materials like plastics and rubbers .
Madbull has developed a gas nozzle adopter that has a small reservoir where you drop some silicone oil inside. When filling the gas to the magazine, the silicone oil will mix up with the gas and does lubricate the sealing components of the pistol magazine so this is to prevent rubber sealing from drying up .
Step 4- Tilt the tank and open the small nub. drop some (3-5 drops) silicone oil in and close it.
propane gas tank is now ready to fill in your GBB magazine.
actual test:
Room temperature at 19 degrees celcius.
Here is my video using a Worthington propane gas in a stock soso Taiwan made GBB 4.3 hi-capa.
Maximum velocity is 90.2 m/s at .20g excell bio bb . Same velocity of my M4 cqb stubby lol ;D
Warning!!!
1 Do not use this adapter near open flame.
2. Do not use adopter in poorly ventilated or confined spaces.
3 Do it at your own risk.
For those who are constantly looking for methods of maintaining your Tokyo Marui Gas Blow Back Pistol to shoot in a whole year around (summer, spring, fall and winter season) the quest is over and no more borrowing of your girl friendfs hair dryer for heating your pistol magazines during cold season .lol ;D
Worthington Propane/Green Gas is now available. I bought mine from bro Fortminor
Now, in order to run this gas in your pistol, you need these two stuff, the Madbull Green gas adopter and # 15 HP silicon oil or any low density silicone oil. I will explain later on how to use these stuff while this brief instruction goes on.
Basic Installation guide:
Step 1- remove the cap
Step 2- put pipe Teflon tape on the thread to insure tight fitting and to prevent gas leakage. (2-3 turns is enough)
Steps 3- install the gas adopter. Twist clock wise, Do it as quick as you can, if you donft have strong griping in your hands
You can also use a pipe wrench just like I did. (do not over tighten and do not cross the adopter threads)
Note: Green Gas is dry and can damage solid materials like plastics and rubbers .
Madbull has developed a gas nozzle adopter that has a small reservoir where you drop some silicone oil inside. When filling the gas to the magazine, the silicone oil will mix up with the gas and does lubricate the sealing components of the pistol magazine so this is to prevent rubber sealing from drying up .
Step 4- Tilt the tank and open the small nub. drop some (3-5 drops) silicone oil in and close it.
propane gas tank is now ready to fill in your GBB magazine.
actual test:
Room temperature at 19 degrees celcius.
Here is my video using a Worthington propane gas in a stock soso Taiwan made GBB 4.3 hi-capa.
Maximum velocity is 90.2 m/s at .20g excell bio bb . Same velocity of my M4 cqb stubby lol ;D
Warning!!!
1 Do not use this adapter near open flame.
2. Do not use adopter in poorly ventilated or confined spaces.
3 Do it at your own risk.
