How to dis-assemble M92F inner frame

[maverick]

Mga Bro, paano ba tanggalin ang bolt na pinagkabitan ng trigger. May special tooling ba para dito?



Kailangan ko kasing idis-assemble yun pistol ko.

[benigno]

hello im new here.


the encircled part is a dummy or fixed screw you can not remove it.




In order to remove the internals of your gun, follow these basic steps,


step 1- remove the magazine.

step 2- remove the slide. to remove the slide--> twist the slide lock knob and push the pin which is located in the opposite side and slowly push forward the slide away from the frame

step 3- remove the 4 screws in the grip.

step 4- after removing the grip you can now see small lock pins in the lower frame. these lock pins hold the entire lower internals like hammer spring housing, shears, mag catch & etc. now remove the pins (use hammer and small nail or alike )

step 5- twist counter clockwise the number 5 ,

after removing the number five (5).. you can now dettach the hammer spring housing, shears (connecting to trigger assembly), springs, and trigger assembly.

happy gunsmithing.

disclaimer:
im not a pro. but this simple disassembly guide will surely give you an idea on how to disassemble TM M92F. i hope this help


Cheers,

B

[dmhikaru]

thanks for the info sir benigno..

[benigno]

ehem.. no probs ;D

[maverick]

Sir, thanks a lot for the info.

I already removed the number 5 last time but missed to do the step 4 completely, especially removing the lock pin. Anyway, I already asked Echigoya to fixed my gun to attached a spring back in hammer assembly -it was dettached during my too much cleaning ;D.

Really thanks for the info and hope I can do it next time using the above process.